CONNECTING PHONES AND DEVICES
T A L K S W I T C H Q U I C K G U I D E
WHAT WILL MY PHONE SYSTEM DO?
CONNECTING PHONES
AND DEVICES
Default Equipment Settings:
!
Simply connect the Talkswitch to your phone system (as shown below). Your phone
system will do the following:
C T.T S 0 0 5 . 5 0 5 . E N – 0 3
• An incoming call on any line will ring all local extensions.
• A receptionist can manually transfer calls to local extensions or voicemail.
• Every local extension gets a voicemail box.
• Extension 114 (E4) works during a power failure.
Additional Call Handling Capabilities can be added by installing the TalkSwitch Software.
Model Differences
Suggested Configuration
This shows the default connections to the
TalkSwitch 48-CA, 48-CVA, and TalkSwitch 24-CA.
TalkSwitch 24-CA
2 Lines In (L1/L2 and L2 only)
4 Local Extensions (E1–E4 only)
No LAN Connection
Call Handling
Voicemail Memory Slot
Additional call handling capabilitities can be
added by installing the TalkSwitch Software.
TalkSwitch 48-CA and 48-CVA
4 Lines In (as shown)
8 Local Extensions (as shown)
LAN Connection
Voicemail Memory Slot
SUGGEST CONFIGURATION
TalkSwitch Back Panel
Connections from the TalkSwitch to all your telephone devices and computer, you
need not add all of the phones. The fax machine should be put into local extension
‘E8’ for a TalkSwitch 48, or ‘E3’ for the TalkSwitch 24-CA.
Remote Extensions 211, 212 ... 218
‘E5’ jack to
‘E6’ jack to
‘E7’ jack to
‘E8’ jack to
Extension 115
Extension 116
Extension 117
Extension 118
(fax)
Incoming Phone Lines
L1 to L4
*Memory card
slot on the side
LAN
AC connection to
power outlet
Music-on-Hold
3.5mm jack
P.A.
3.5mm jack
Serial connection to
PC computer via an
RS232 serial cable
TalkSwitch 48-CA/ 48-CVA shown here.
USB connection to
PC computer via a
USB cable
(receptionist)
‘E4’ jack to
Extension 114
‘E2’ jack to
Extension 112
‘E3’ jack to
Extension 113
‘E1’ jack to
Extension 111
W W W.TA L K S W I TC H .CO M
1
|