MODEL 2576
OWNER’S
MANUAL
HEPA 2500
AIR CLEANER
OPERATING INSTRUCTIONS
CAUTION:
READ AND
SAVE THESE
INSTRUCTIONS.
Any questions or comments?
Call I-800-526-2832
-
4
p.m. Central Time
Mon.-Fri. 8 a.m.
Your Sunbeam 2500 Air Cleaner has been designed to
let you enjoy a refreshing experience in clean air living.
Airborne particles are removed from air passing
through the unit.
2. CARTRIDGE AIR FILTER
3.
CHARCOAL
1.
PRE-FILTER
(HEPA
FILTER)
AFTER-FILTER
NOTE: This owner’s manual should be read tho-
roughly before your air cleaner is operated.
Keep your owner’s manual for future refer-
ence.
\
HOW THE SUNBEAM HEPA 2500
AIR CLEANER WORKS
The air around you is filled with thousands of particles
of air pollution. Some of the pollutants (dust, smoke
and lint) are visible to the naked eye, but most of the
pollutants (pollen and bacteria, to name a few) are
microscopic in size.
Figure 2
UNIT LOCATION
Select the location for your air cleaner with an electri-
cal outlet nearby. An example of locating your air
cleaner is shown in Figure 3.
Your true HEPA Filter is enclosed with a sealing label
placed over the top of the collector assembly. This
label provides a complete sealing of the HEPA Filter
ensuring a 99.97% efficiency at removing common
indoor air particles. Do not remove this label unless
replacing the HEPA or Charcoal Filter.
NOTE: DO NOT USE AN EXTENSION CORD TO
SUPPLY POWER TO YOUR AIR CLEANER.
Your console air cleaner can be placed almost any-
where as long as the air can freely circulate into the top
front grill and out of the bottom front grill. (Figure 1)
As polluted air is drawn into your console air cleaner
(Figure 1), an Aluminum Pre-Filter strains out the
larger particles of pollution. The air then passes
through the cartridge air filter (HEPA Filter) where
microscopic particles are collected.
,
The now cleaned air then passes through a filter of
activated carbon. Activated carbon acts like a sponge
to help remove odors. (Figure 2) Having been cleaned
three ways, the air returns to the room through the
bottom front grill. (Figure 1)
P O L L U T E D
AIR IN
C L E A N
AIR OUT
Figure 3
Figure
1
OPERATION
MAINTENANCE
Plug the cord into any standard household electrical
outlet. (See data label for electrical specifications and
power consumption. This data label can be seen when
the cabinet top is removed.)
CARE OF CABINET
You should treat the cabinet of your air cleaner as you
would any other piece of fine furniture. A soft, damp
cloth will keep it clean and attractive for many years.
The front grill can be cleaned using a vacuum cleaner
with a brush attachment.
Turn the unit on by sliding the ON/OFF switch to the
desired speed: “DAILY USE, MEDIUM or HIGH”. (Fig-
ure 4) The air cleaner should be set on HIGH for 1
minute before switching to desired speed to initially
start-up the unit. Your air cleaner is designed for con-
tinuous operation -- peak efficiency is obtained when
the air cleaner remains on constantly. For best results,
select “DAILY USE” setting.
TO REMOVE HEPA FILTER ASSEMBLY
Turn off the air cleaner and unplug it from the electri-
cal power source.
Remove the cabinet top by lifting up and remove the
Sealing Label (enables 99.97% efficiency) from the top
of the HEPA Filter Assembly. Do not discard Sealing
Label. Lift out the collector assembly using the flip-up
handle. (Figure 6)
An operating light is located on the top right front grill
and indicates that the unit is operating. (Figure 5)
The HEPA Filter Assembly includes:
Aluminum Pre-Filter, HEPA Filter and Charcoal
After-Filter.
The front filter (Aluminum) is the Pre-Filter. The HEPA
Filter is the middle (large) filter, and the Charcoal After-
Filter is in the back of the HEPA Filter Assembly. (Fig-
ure 7)
Figure 4
Figure 6
O P E R A T I N G
L I G H T
C H A R C O A L
AFTER-FILTER
HEPA
FILTER
HEPA
,
FILTER
ALUMINUM
PRE-FILTER
Figure
5
ASSEMBLY
Figure 7
TO REPLACE HEPA FILTER ASSEMBLY
TO CLEAN PRE-FILTER
Slide out Pre-Filter located in front of the Filter Assem-
bly. Rinse thoroughly with clean warm water. Set aside
to dry.
NOTE: Use directions on the top of the HEPA Filter
Assembly for proper placement of the filters
into the assembly and for replacing the as-
sembly into the unit.
Using the handle, slide the HEPA Filter Assembly back
into the cabinet. Aluminum Pre-Filter will face the front
grill. Replace the Sealing Label provided with the new
HEPA Filter over the opening containing the HEPA
Filter Assembly.
REPLACEMENT OF HEPA FILTER
After about 12 months of collecting dirt, dust, pollen
and other pollutants, the HEPA Filter of your unit will
need to be replaced. The HEPA Filter cannot be
cleaned. Use the enclosed reorder form to order
replacement filters if not available from your retailer.
TO REPLACE CABINET TOP
Remove the Pre-Filter and Charcoal After-Filter from
the HEPA Filter Assembly and place aside. The HEPA
Filter can now be discarded. Using the directions on
top of the new HEPA Filter, replace the aluminum
Pre-Filter in slots provided in front of the HEPA Filter
and replace the Charcoal After-Filter in the slots pro-
vided in the back.
Replace the cabinet top by positioning over the unit
and placing on cabinet. (Figure 8) Be sure that the plas-
tic ball and socket are engaged.
Plug the cord into the electrical power source and
select desired speed.
REPLACEMENT OF CHARCOAL FILTER
PLASTIC
ACTIVATED CHARCOAL FILTER HELPS REMOVE
HOUSEHOLD ODORS.
BALL
8
SOCKET
To remove the Charcoal Filter, remove the Sealing
Label from top of Filter Assembly and place aside so it
can be reused. Remove the Charcoal Filter from the
Filter Assembly. Do not wash the Charcoal Filter. It
should be replaced every 3-6 months under average
conditions. These filters are available in your retail
Figure 8
store or use the enclosed order form.
After replacing the Charcoal Filter, return the Filter
Assembly back into the cabinet. Reseal the top of the
Filter Assembly with the Sealing Label removed pre-
viously.
TROUBLESHOOTING CHECKLIST
Many times questions that appear to be major can be solved quite easily. The chart below lists potential questions/
problems and how to correct them. Remember, check the simple things first.
WHAT TO DO
1. Plug in power cord.
CONDITION
WHAT TO CHECK
1. Power Cord
Unit fails to turn on.
2. Check for power to the electrical outlet.
Plug a table lamp into the electrical outlet
to ensure power availability.
2. Electrical Outlet
3. ON/OFF Switch
3. Set ON/OFF Switch to desired speed.
4. Cabinet Top is properly
intalled
4. Refer to section on previous page,
“To Replace Cabinet Top.”
5. Collector assembly is pro-
perly installed.
5. Use directions on the top side of the
assembly. Aluminum Pre-Filter will face the front
grill.
1. As the HEPA Filter collects, a higher speed
may be necessary to maintain the original
cleaning level of the air cleaner.
HEPA Filter
Unit does not
remove pollutants/
Reduced air flow
2. The HEPA Filter needs to be replaced. (Will
need to be replaced every 12 months or
sooner depending on the environment the
air cleaner is operated in.)
Re-check the above points.
Return unit to Appliance Service Station,
Hattiesburg, MS, for service. See
Warranty Information on back cover
for address.
Unit still does not
operate properly.
NOTE:
Blowing smoke directly into the front grill is not a good test for unit performance.
4
CABINET TOP
CHARCOAL
R E P L A C E M E N T
FILTER
2
ALUMINUM
P R E - F I L T E R
PARTS LIST
Part
Number
Key
Number
Description
Cabinet Top
1
344953-001
Aluminum Pre-Filter
HEPA Filter
2
3
4
123324-003
6576
Filter
Charcoal Replacement
6575
To order Replacement Parts, write to Appliance Service Center, 117 Central Industrial Row, Purvis, MS 39475.
Notes/Notas
31
MODEL 2576
HEPA 2500
AIR CLEANER
LIMITED ONE YEAR WARRANTY STATEMENT
OWNER’S
MANUAL
This product is warranted for one year from the date of purchase
against electrical and mechanical defects in material and workman-
ship. If the unit fails to operate during this period, return it, prepaid, to
Appliance Service Station, 117 Central Industrial Row, Purvis, Mississ-
ippi,39475, for repair or replacement without charge at the manu-
facturer’s option. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.
Warrantor: Sunbeam-Oster Household Products
Made in America
Part No. 61803 (144965001)
@Sunbeam,
Household Products, Distributed by Sunbeam-Oster Household Products, Schaumburg IL 60173
Committed To Our Environment . . . Printed on Recycled Paper
Printed in USA
|
Sharp CRT Television LC 24LE240E User Manual
Sony Computer Monitor GDM 400PST9 User Manual
Sony Computer Monitor GDM W900 User Manual
Sony eBook Reader PRS 900 User Manual
Sony Video Game Console SCPH 50003 SS User Manual
Stamina Products Bicycle 15 4550 User Manual
Sterling Marine Instruments 6414 A User Manual
Sterling Plumbing Camera Lens SDRIOM 2 User Manual
Summit Gas Grill E S 420 450 User Manual
Sun Microsystems Network Card 805 7945 10 User Manual